Cleaning: Do not use solvents or chemicals that may damage the finish on the frame. Clean with water and a soft cloth. Mild cleaning solutions or disinfectants (can not contain bleach or chlorine) are also acceptable.
Hydraulic Table Maintenance: As with any hydraulic pump, this unit may occasionally become air-bound especially during shipping as it is tipped over and the air is trapped within the cylinder. To purge the air from fluid lines: pump rapidly to full height, hold tp with your hands at the top position and continue to pump full strokes 20 to 30 times. Then press the pedal and hold down to allow the ram to descend rapidly. If the hydraulic pump is still “spongy” repeat the procedure.